Wheel Loader ZL30H

This product has been discontinued and removed from our shelves.

Description of Wheel Loader ZL30H:
Wheel loader ZL30H is equipped with Chinese Dongfeng-Cummins Engine, 3 forward 3 reverse power shift transmission, Combined seal cylinder which obtains high seal performance and more reliability. This Wheel loader ZL30H is recognized as a kind of useful construction machinery (construction equipment).
Applications of Wheel Loader ZL30H:
Wheel loader ZL30H is a type of construction equipment (engineering vehicle, construction machinery) that is primarily used to scoop up material such as asphalt, demolition debris, dirt, gravel, logs, raw minerals, rock, sand, wood chips, etc. to another place.
Specifications of Wheel Loader ZL30H:
Overall Dimension
1 Length(with bucket on ground) 6863(mm)
2 Width(to outside of wheels) 2305mm)
3 Bucket width 2460(mm)
4 Height(To the top of the cab) 3095(mm)
5 Wheel base 2750(mm)
6 Tread 1855(mm)
7 Min. ground clearance 370(mm)
Main Technical Specification
1 Rated load 3000(Kg)
2 Operating weight 10200KG
3 Rated bucket capacity 1.7(m3)
4 Max. breakout force 96kN
5 Max. dump clearance 2850(mm)
6 Dump reach 1030(mm)
7 Dump angle at any position ≥45°
8 Min. turning radius

(1) Outside of bucket 5600(mm)
(2) Outside of rear wheel 5205(mm)
9 Pivot angle frame 38±1°
10 Oscillating angle of rear axle ±11°
11 Lifting time of bucket ≤5.1(sec.)
12 Lowering time of bucket ≤3.0(sec.)
13 Dumping time ≤1.1(sec.)
14 Traveling speed(Km/h),3 forward and 3 reverse

(1) 1st gear forward 7.3
(2) 2nd gear forward 15.7
(3) 3rd gear forward 35
(1) 1st gear reverse 7.8
(2) 2nd gear reverse 16.8
(3) 3rd gear reverse 36
Diesel engine
1 Model Dongfeng Cummins  6BT5.9-C
2 Type Direct injection. Turbocharged. Water cooling
3 Rated output 87(KW)
4 Inter-bore of cylinder/stroke 102 /120 (mm)
5 Total exhaust of cylinder 5.9 (L)
6 Voltage of starting motor 24(V)
7 Rated speed 2200(r/min)
8 Max. Torque 440(N.M)
9 Starting type Electric
10 Min. specific fuel consumption 220(g/Kw.h)
Transmission System
1. Torque Converter
1 Model YJH315A-4 (Shanxi Aerospace Power)
2 Type 3-elements. Single stage
3 Torque ratio 2.4
4 Cooling type Pressure oil circulating
2. Transmission case
1 Model Chinese SINOMACH
2 Type power shift, spur gear constantly in mesh
3 Gear shift position 3 Forward and 3 reverse gears
3. Axle and Tire
1 Type of main reducer spiral bevel gear, single stage
2 Gear ratio of main reducer 3.889
3 Type of final reducer Single stage planetary
4 Gear ratio of final reducer 4.941
5 total ratios 19.216
6 Max. traction 83kN
7 Specifications of tire 17.5-25-12PR
Working Device Hydraulic System
1 Model of oil pump CBGj2100
2 System pressure 160(kgf/cm2)
3 Model of distribution valve GDF32 D2
5 (D*L)Dimension of lifting cylinder Ф125*70*697(mm)
6 (D*L)Dimension of tilting cylinder Ф150*70*466 (mm)
Steering System
1 Type Middle articulated frame. Full-hydraulic Steering
2 Model of steering pump CBGj2050
3 Model of steering gear BZZ1-E400C+FKA-143020
4 System pressure 14MPa
5 Dimension of steering cylinder Ф70*40*323(mm)
Brake System
1 Type of traveling brake Assisted oil.4 wheel brake
2 Air pressure 7-8(kgf/cm2)
3 Type of emergency brake Automatic cutting air brake
4 Type of parking brake Drum brake
Manual control cutting off air brake
Oil Capacity
1 Fuel(diesel) 130(L)
2 Engine lubricating oil 20(L)
3 Oil for converter and gear box 35(L)
4 Oil for hydraulic system 120(L)
5 Oil for driving axles(F/R) 16/15(L)
SINOMACH Construction Machinery and Engineering Vehicle, High Quality!!